- SupplyAbility: 1000
- Port: Xiamen
- Min. Order: 1 (Pieces)
- Packaging Detail: plywood package
- Delivery Detail: by sea
- Shipment Terms: CIF,FOB
- Payment Terms: T/T,L/C
Ø Before using this product, please read operation instruction carefully.
Ø Pressing without contact mould is strictly prohibited to avoid damaging to components.
l Specification & Application:
The tool pressure could be automatically adjusted in any direction. The characteristics are stable crimping in low resistance and high efficiency. It is ideal tool for compression of diamond wire saw connector.
l Operation manual:
While compressing connector, put the connector (and diamond wire saw end) in the crimping die, and then tighten oil return switch. Turn moveable handle to drive plunger work. Then oil pressure lifts. Big plunger push crimping die ahead until two pieces of dies touch slightly. (Don’t impose more pressure. Otherwise parts inside would be damaged.) The hydraulic compressor is fitted with safety unit, it would release pressure automatically when pressure reaches to preset limit. Then undo oil return switch. The piston automatically reset. The first step finishes. The step 2 is by analogy with step 1. It is normal that there is little oil appearing from plunger and big piston in operation.
Compact structure, it needs to be maintained by specific person. Hitting, impacting and damp must be strictly prohibited. Don’t disassemble at discretion. After period of time of operation, oil volume would be reduced slightly so that the No. 20 mechanical oil must be filled. (In disassembly, keep site clean to avoid dust and sanders.) Rotate and disassemble the fixed handle and pull out back oil piston from oil bag… Add in 200 eye filtrated net. After filtration of No. 20 mechanical oil, should be fully filled. Then undo oil return switch. Turn the moveable handle repeatedly. Discharge the air from oil bag. Then tighten oil piston and fixed handle.
l Technical parameters: